limiting speed造句
例句與造句
- It is always advisable to limit speed with flow controllers
建議總是用? ?控制器限制速? 。 - Dwls double weight limiting speed governor
雙錘限速調整器 - Due to the limited speed of csd , packet - based access must be used if wap is to develop
鑒于csd方式的速度限制， wap要想有所發展，必須采用基于分組方式的接入手段以獲得更快的速度。 - The thrust bearings are capable only to sustain the axial loads , with low limit speed . they have two stress modes , i . e . one - way thrust and two - way thrust
推力軸承只能承受軸向負荷，極限轉速低。有單向推力和雙向推力兩種受力方式。 - Using direct current generator principle , set up electromagnetic limit speed auto - rotate nozzle stable state operate circuit , mechanics , energy equation
應用直流發電機原理，建立電磁限速的自旋轉噴頭穩態運行時的電路、力學、能量方程。 - It's difficult to find limiting speed in a sentence. 用limiting speed造句挺難的
- Over a three - year testing period it was found that dayou precision bearings perform substantially better than imported precision steel bearings of the same size , service life and limiting speeds
大友公司的精密陶瓷軸承已進行了三年工業化試驗，其極限轉速和壽命均超過同規格進口鋼制軸承。 - Adopting the method that the theory combines with experiment , solve the problem of rotate , seal , speed of assigning limit of the torsion , nozzle initially sequentially , nozzle assign and limit speed problem
采用理論與實驗相結合的方法，依次解決旋轉密封、起始旋轉扭矩、噴嘴布置和限速問題，設計了自旋轉噴頭。 - Lately , the limited speed of flywheel rotor has been increased to 200 , 000 rpm , and the energy storage density has been increased to 134 wh / kg . moreover , the theoretic energy storage density could reached 306 wh / kg
目前飛輪轉子最高轉速達到20萬轉每分，儲能密度也達到134wh kg ，其理論儲能密度甚至高達306wh kg 。 - The computer program is designed by visual c + + . the mscomm controls are added to receive the data . the rotor speed , the axis track and limited speed can be measured , and the curves can be displayed on the computer
我們用at89c52作為微處理器，采集信號并進行相應的處理，通過一條串行總線傳給上位機，上位機的軟件由visualc + +編制，采用多個mscomm控件對各個實驗項目的數據進行接收，可在線完成轉速、軸心軌跡及臨界轉速的測量，并繪制曲線。 - Angle contact ball bearing can be subject to both radial and axial load , it also can be subject to pure axial load , its axial load capacity is depend on the contact angle and increased accordingly . it can be used for high speed and high precision application dueto high limit speed and pre - adjustable rigidity
角接觸球軸承可同時承受徑向載荷和軸向載荷，也可以承受純軸向載荷，其軸向載荷能力由接觸角決定，并隨接觸角增大而增大，且極限轉速較高，剛性大還可預調，適用于高速、高精度場合。 - The effect of the testing platform is given , including its photo and the experiment curves that have been measured . the rotor speed curve , the axis track curve and the limited speed curve are listed . finally , the work that has been finished and will be done to transform the testing platform to a product is summarized
作者給出了目前實驗臺所達到的效果，列出了實驗臺的照片和所測得的實驗曲線，包括轉速隨時間變化曲線、軸心軌跡曲線和臨界轉速曲線，最后對全文進行了總結，并提出了旋轉機械動態測量實驗臺產品化所尚需完成的工作。